4 Inch Vacuum Table

Built to Order: This is a very simple vacuum table unit that is low profile with a height of approximately 2 3/4 inches and 4 inches square. It can be taken apart if needed should metal, sand or investment be sucked into the small blowout chamber. ***It is also recommended that some sort of inline filter be added near the pump in the event any investment / sand or other debris gets beyond the chamber.

* Requires a quick release attachment on the vacuum hose. Vacuum hose not included.

* Picture 3 shows it taken apart by loosening the top four bolts and taking off the top. Picture 4 shows the bottom and picture 5 shows it with the reddish silicone pad for sand casting.

* When investment casting the white / tan silicone pad is used and when used with sand casting it's best to use the reddish silicone pad with the plastic insert.

U.S. Shipping: Medium box Priority or Ground Advantage.