This simple sterling silver ring casting is so much fun because after you finish the casting you then get to interchange all the little LEGO® elements which came included with the casting.
Picture 3 shows what a possible finished ring might look like.
When finishing the casting, it is important to spend a little extra time preparing the round section on top so that the LEGO® elements fit properly. First start by filing the post slightly so the LEGO® fit snug and if filed too loose just slide the ring on a mandrel and use a small round dapping punch and hammer to tap the center hole and expand it slightly.
A selection of 10 various LEGO® colors will come with the unfinished casting but not all are always available. To purchase more please look up Pick a Brick online.
Ring shank is nearly 3mm wide and just over 1.5mm thick.
Rings comes in a standard size 8 1/2 - 9.
Ring is cast in sterling silver.
LEGO®, the LEGO logo, DUPLO®, BIONICLE®, MINDSTORMS®, the BELVILLE, KNIGHTS’ KINGDOM and EXO-FORCE logos, the Brick and Knob configurations and the Minifigure are trademarks of the LEGO Group of companies, which does not sponsor, authorize or endorse this site.